LSx Parts Page

This is only a small selection of the parts we have available for these engines. The aftermarket support for these engines is very large and diverse. If you do not see what you are looking for, please contact us and we will be glad to help you.

Ignition
Cylinder Heads
Head Bolts
Intakes
Air Intakes
Camshafts/Valvetrain
Headers

NEW PRODUCT !!! VMax Motorsports CNC ported LSx throttle bodies!!!!!

Ignition

MSD MSC LS1/6 car coils, set - $
MSD MSC LQ truck coils, set - $
MSD MSC LS2/7 coils, set - $

MSD wire set Corvette LS1/6 - $
MSD wire set Truck LSx - $
MSD LSx cut to fit wires, straight and 90* boots - $

Cylinder Heads

Edelbrock/Lingenfelter CNC heads - $2400.00
Edelbrock Performer RPM heads - $1920.00

RHS 210cc heads with Comp Cams "918" springs - $2500.00
RHS 210cc heads with Comp Cams "921" springs - $2875.00
RHS 225cc heads with Comp Cams "918" springs - $2500.00
RHS 225cc heads with Comp Cams "921" springs - $2875.00

Head Bolts

ARP head bolts 1997-2004 LSx - $155.00
ARP head bolts 2004 equal length and Gen IV LSx - $110.00

Intakes

LS6 intake with front steam pipe and rear block offs - $485.00

Edelbrock RPM intake - $265.00
Edelbrock Vic JR intake - $320.00

Holley 80mm throttle body(cable drive) - $435.00
Holley 90mm throttle body(cable drive) - $435.00

VMax Motorsports CNC ported Fbody throttlebody(core charges apply)- $150.00

VMax Motorsports ported LS2 intake($200 core charge applies)- $285.00
VMax Motorsports CNC ported LS2 throttlebody(core charges apply)- $150.00


VMax/Com Tech 90 and 95mm Corvette throttle bodies* - $470.00
Vmax/Com Tech 90 and 95mm Fbody(cable driven) throttle bodies* - $405.00
Vmax/Com Tech 100mm Corvette throttle body* - $495.00
Vmax/Com Tech 100mm Fbody throttle body* - $445.00

*90mm throttle bodies will fit LS1 and LS6 intakes with boring. FAST 90mm, LS2, and L92 intakes are a direct bolt on.
95mm throttle bodies fit LS2, L92, and LS7 intakes with boring.
100mm throttle bodies do not fit stock intakes. Custom intakes only.

Air Intakes

Donaldson/SLP Blackwing C5 air intake - $260.00
Required MAF boot for 2001-2004 cars - $20.00

Camshafts and Valvetrain

Comp Cam camshafts, any grind- $360.00
Comp Cams "918" valvespings, good to .600" lift - $185.00
Comp Cams "921" dual valvespring kit, good to .650" lift - $620.00
Comp Cams "RPM" Kit with "918" springs, retainers, and pushrods - $480.00
Comp Cams "Hi-Tech" hardened pushrods, 7.400"- $135.00
Comp Cams Hex-a-just timing set LS1/6 - $190.00
Comp Cams Hex-a-just timing set LS2 - $170.00
Comp Cams Pro Magnum rocker set, 1.75 or 1.85 ratio - $475.00